
Branch:
Mechanical Engineering
Qualification:
PhD in Mechanical Engineering & M.Tech in Mechanical Engineering (CUSAT)
Email:
Profile
Dr. Bijesh Paul has 26 years of teaching experience in Mechanical Engineering. Dr. Bijesh Paul has established himself as a Key Person in academic administration and Mechanical Engineering. His career trajectory shows a clear shift from focused academic research to high-impact institutional leadership.
Research Interest
- Probabilistic Forecasting
- Industrial Engineering
- Solar Drying
Honours & Awards
- Chair of Conference in International MATTECH-2024 (29th November 2024) organized by Department of Mechanical Engineering, Toc H Engineering College in association with ISHRAE Cochin chapter.
- Chair of Conference in International Conference ICTACME 2023 (22nd February 2023) organized by KMEA Engineering College
- Chair of Conference in International conference on Emerging Trends in Science and Technologies 2020 organized by Universal Engineering College, Thrissur
Invited Talks
- Invited talk about NAAC Accreditation at METS Engineering College, Mala on 13/4/22.
- Keynote speaker at FDP in Mets College of Engineering regarding NAAC Accreditation during March 2022.
- Keynote Speaker at international conference on emerging trends in science and technologies 2020.
Projects
- Project grant of 7.2 lakhs from UiTM and KEC for the project titled “Development and Characterization of Bamboo Nanofibers Polypropylene-CNT Hybrid Nanocomposite
- Design, Development & Performance Analysis of an Indirect Forced Convection Portable Multipurpose Solar Dryer recommended as best project to KTU from ME department in 2025.
Publications
- V Kumar RS, B AR, A KM, S KM, A MA, J Mammoo, B Paul (2025), Explainable artificial intelligence for detecting lung cancer, Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska 15(Scopus indexed)
- Md Noh, Nur Ilya Farhanaand Muhd Fauzi, Umar Hazim and Akhbar, Suffiyana and Ahmad Zakiah and Sharudin Rahida Wati and Abdul Rahman Sajith Thottathil and Paul Bijesh (2024) : The effects of chemical treatment parameters on the yield of bamboo fibers extracted / Nur Ilya Farhana Md Noh … [et al.]. Journal of Sustainable Civil Engineering & Technology (JSCET), 3 (2): 4. pp. 34-42. ISSN 2948-4294
- Umar Hazim Muhd Fauzi, Nur Ilya Farhana Md Noh, Suffiyana Akhbar, Zakiah Ahmad, Rahida Wati Sharudin, Sajith Thottabthil AbdulRahman, Bijesh Paul (2024), Optimisation of chemical treatment parameters for enhanced yield of cellulose nanofibres from Semantan Bamboo (Gigantochloa scortechinii), Malaysian Journal of Chemical Engineering and Technology (MJCET)
- Bijesh Paul (2024) “Forecasting of Milk Demand Based on Indian Scenario”, Computer Research and Development Journal, Volume 24, Issue12, ISSN NO:1000-1239-Scopus Index Link – https://www.scopus.com/sourceid/26714
- Bijesh Paul and Muhammed Yahiya (2024) “A Comprehensive Study on the Design, Development & Performance Analysis of a Portable Multipurpose Solar Dryer”, International Journal of Creative Research Thoughts, Volume 12, Issue 12, ISSN NO 2320-2882-UGC indexed- UGC Approved Journal No: 49023 (18)
- Bijesh Paul and Jayadas N.H. (2015) “A Demand Forecast Model Based on Moving Average and Markov Method”, Journal of Statistics and Management Systems, Volume 18, Issue 1&2, pp. 139-159, ISSN Print: 0972 – 0510, ISSN Online: 2169 – 0014. –UGC & ESCI indexed
- Paul Bijesh and Jayadas N.H. (2014) “Forecasting of a Short Life Baked Product Using Exponential Smoothing and Markov Method.”, European Journal of Technology and Design, Volume 5, Issue 3, pp. 108-122, ISSN: 2308 – 6505, E-ISSN: 2310 – 3450.
- Bijesh Paul and Jayadas N.H. (2013) “Demand estimation for a short life cycle and novel product by using modified Markov based algorithm”, Elixir International Journal, Volume 62, pp. 17555-17563, ISSN: 2229 –
- Bijesh Paul and Jayadas N.H. (2013) “A Generalized Algorithm for the Demand Prediction of a Short Life Cycle Product Supply Chain and its Implementation in a Baked Product”, International Journal of Mechanical Engineering & Technology (IJMET), Volume 4, Issue 1, pp. 44 – 53, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359.
- Bijesh Paul, Rajesh R. and Dr. Jayadas N.H. (2012) “Modelling and Simulation of Short Life Cycle Baked Products by using petrinets”, International Journal of Mechanical Engineering & Technology, Volume 1, Issue 1, pp. 150-165, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359.
Workshops & Conferences Organized
- Three day faculty development program (FDP) on material science on February 6th, 7th & 8th, 2023 sponsored by KTU & conducted by department of Mechanical Engineering, KEC.
- Eight day workshop on Electric/Gasoline Formula Race Car Design & Development during 2/10/19 to 14/10/19.
- Eight day internship on Electric/Gasoline Formula Race Car Design & Development during 24/9/19 to 1/10/19.
- Coordinator of National conference NCTACME-19 conducted by KMEA Engineering college during March 2017..
- Staff coordinator of Mechnosis-14 conducted by Universal Engineering College, an intercollegiate paper & poster presentation competition 20th March 2012.
- Coordinator of Paper presentation competition namely Avanza -12 conducted by AISAT on 24th
FDPs STTPs & Workshops Attended
- Five day faculty development program (FDP) on Fusion Fundamentals of Cad & Cam from 5/12/2025 to 9/12/25 by Autodesk.
- One Day FDP on IICTs Embedded AI & AIOT Hands on lab & Networking Session with German Experts organized by IICT on 20/11/2025
- One Day District level workshop on Institituional skilling and placement organized by Vijnana Keralam. Kerala Govt. on 11/8/2025
- One Day Faculty Knowledge Sharing Program on Integrating AI policy in higher Education Jointly organized by ICFAI & IBS on 19/7/2025
- Four day Industry-Academia-Government conclave Udyama-2024 on 7th to 10th December 2024 at Trivandrum
- Five Day ATAL Sponsored FDP on Energy & Mobility for future organized by MBITS from 2/12/24 to 7/12/24
- Three day FDP on UHV conducted by AICTE on 5th, 6th & 7th of October 2023 at KEC.
- Five Day STTP on Computational Fluid Dynamics using Open Foam conducted by Universal Engineering College from 31st January 2023 to 4th February 2023.
- Five Day FDP on Cognitive Science conducted by Rajagiri Engineering College from 25th March to 29th March 2023
- One week training program on diagnostic study & staff training organized by IQAC, KEC from 29th November to 4th December, 2022
- Seven Day FDP on Accreditation Process from 20th May to 28th May 2020.
- Five Day FDP on Learning Management System, Moodle by KTU, 2020.
- One day FDP on NBA Accreditation at Mariyan College Kuttikanam, January 2020.
- Three day National workshop on Revised Assessment and Accreditation framework of NAAC by IQAC of Sree Budha College of Engineering Alapuzha on 17, 18, 19 January 2019.
- One day conference on Entrepreneurship – A National Imperative by APJ Abdul Kalam Technological University 11th 2016.
- Three day faculty development program on Research Methodology conducted by GEC Trichur 29.30.& 31 June 2015.
- Two day workshop on supply chain role play game conducted by NIT Calicut during 21st & 22nd December, 2012.
- Two day Placement officer’s workshop and Entrepreneurship conference, Power-12 conducted by Albertian Institute of Science and Technology on 20th & 21st April, 2012.
- Two week workshop on introduction to research methodology conducted by IIT Mumbai from 25th June to 4th July, 2012
Professional Body Membership
SAE INDIA
Courses Offered
- Core Mechanics & Design
- Fluid & Thermal Sciences
- Industrial Engineering & Management
- Materials Management