loader image
Skip to main content

KMEA Engineering College

Dr Sajith T A
Associate Professor
APAAR ID : 368781279546

kmea

Dr. Sajith TA

Branch:

Mechanical Engineering

Qualification:

PhD in Materials Engineering (Universiti Teknolgi,MARA, Malaysia), M Tech in Nanotechnology (NIT Calicut)

Joined Date:

17 August 2020

Profile

Dr. Sajith T.A has 8 years of teaching experience in Mechanical Engineering and 7 years of interdisciplinary research experience in polymer-based composite materials for radiation shielding applications. His academic contributions include 4 first author and 10 co-author publications in reputed international peer-reviewed journals, in addition to 3 authored and edited books.

He has demonstrated strong academic leadership and collaborative capability through successful research proposal development and the establishment of institutional and industry partnerships. He previously served as Head of the Department of Mechanical Engineering, during which he led the NBA accreditation process. He currently supervises two PhD scholars at APJ Abdul Kalam Technological University.

He holds several key administrative and academic leadership roles, including Nodal Officer for the National Academic Depository (NAD–DigiLocker), All India Survey on Higher Education (AISHE), National Institutional Ranking Framework (NIRF), and Kerala Institutional Ranking Framework (KIRF). He also serves as Deputy Controller of Examinations at KMEA Engineering College (Autonomous), Dean of Research at the Place of Research, KMEA Engineering College, and Single Point of Contact (SPOC) for the National Programme on Technology Enhanced Learning (NPTEL), KMEA Engineering College Local Chapter.⁠

Research Interest

  • Material Science and Engineering
  • Polymer composites and Technology
  • Material Testing, Radiation Shielding
  • Nanotechnology

Honours & Awards

  • Best Jury in Virtual Asian Innovation Show, V-AIS 2022, Malaysia Innovation Association
  • Graduate on Time (Class of 2020), Faculty of Civil Engineering, UiTM Malaysia
  • Third prize for poster presentation – International Conference on Polymer Processing and Characterization, 2016, ICPPC 16
  • Second prize for poster presentation in International Conference on Nanomaterials: Synthesis Characterization and Applications, ICNM 2019
  • Jury for the International EUREKA Innovation Exhibition 2021, University of Kaula Lumpur
  • Jury for the Virtual Asian Innovation Show, V-AIS 2022, Malaysia Innovation Association
  • Jury for Darshana Ignite 2022, 2024 & 2025 an Innovation and Entrepreneurship challenge for students as APJ Abdul Kalam Technological University panel member
  • Jury for the SRISHTI 2025 – Kerala State Hackathon
  • Editorial Board Member, Journal of Electronic Research Applications, BIO BYWORD Publishers, Australia
  • Reviewer, Advances in Science, Technology and Engineering Systems Journal (ASTESJ), United States
  • Moderator, Track 2: Visualizing and Developing action plan for an I & E ecosystem in HEI, IIC Regional meet 2022
  • Chaired session on Mechanical Sciences at International Conference on Advances in Manufacturing and Material Science 2022 (ICAMMS 2022)
  • Chaired International conference on Materials Science and Sustainable Technologies, 2024 (MatTech 2024)

Projects

  1. Project grant of 7.2 lakhs from UiTM and KEC for the project titled “Development and Characterization of Bamboo Nanofibers Polypropylene-CNT Hybrid Nanocomposite”
  2. Project grant Rs. 31779 KTU CERD for student projects “Remotely Operated Vehicle for Ship Hull Inspection”

Research & Publications

  1. Rekha Lakshmanan, Sajith T. Abdulrahman “Analysis on HAF carbon black influence in rubber plastic blends using image processing techniques” AIP Conf. Proc. 3134, 090003 (2024) (https://doi.org/10.1063/5.0227539 )
  2. Umar Hazim Muhd Fauzi, Nur Ilya Farhana Md Noh, Suffiyana Akhbar, Zakiah Ahmad, Rahida Wati Sharudin, Sajith Thottabthil AbdulRahman, Bijesh Paul “Optimisation of chemical treatment parameters for enhanced yield of cellulose nanofibres from Semantan Bamboo” Malaysian Journal of Chemical Engineering & Technology 2024 (https://journal.uitm.edu.my/ojs/index.php/MJCET )
  3. Nur Ilya Farhana Md Noh, Umar Hazim Muhd Fauzi, Suffiyana Akhbar, Zakiah Ahmad, Rahida Wati Sharudin, Sajith Thottathil AbdulRahman, Bijesh Paul “The Effects of Chemical Treatment Parameters on The Yield of Bamboo Fibers Extracted” Journal of Sustainable Civil Engineering and Technology, 2024, (https://joscetech.uitm.edu.my )
  4. Lokasani Bhanuprakash, TA Sajith, Soney Varghese “Effect of low-temperature exfoliated graphite oxide on the mechanical properties of epoxy nanocomposites” AIP Conference Proceedings, 2022, (https://doi.org/10.1063/5.0130664 )
  5. Alhassan Salami Tijani, Ahmad Naufal bin Samsudin, Sajith Thottathil Abdulrahman, Ibrahim Kolawole Muritala, Jeeventh Kubenthiran, “Thermal-Hydraulic Modeling of Heat Sink Under Force Convection: Investigating the effect of wings on New Designs” Alexandria Engineering Journal, Elsevier 2022, (https://doi.org/10.1016/j.aej.2022.10.045) – (SCIE)
  6. Sajith Thottathil Abdulrahman, Bindu Patanair, Vineeth Puthuparampil Vasukuttan, Sabu Thomas, Emmanuel Cadel, Fabien Cuvilly, Allisson Saiter-Fourcin, Zakiah Ahmad, Maciej Jaroszewski, Michal Strankowski, David Laroze “High-density polyethylene/EPDM rubber blend composites of boron compounds for neutron shielding application” Express Polymer Letters, 2022, 16, 558-572, (https://doi.org/10.3144/expresspolymlett.2022.42 )– (SCI)
  7. Rosnadiah Bahsan, Muhammad Aniq Asyraf Mohd Zamri, Alhassan Salami Tijani, Jeeventh Kubenthiran, Sajith Thottathil Abdulrahman and Ibrahim Kolawole Muritala “Thermal Performances of Hybrid Pin Fin with Connector Heat Sink Under Natural Convection” Pertanica Journal of Science and Technology, 2022, 30(3) 2077 – 2096 ( https://doi.org/10.47836/pjst.30.3.18 ) – ESCI
  8. Aisyah Maisarah Binti Epandi, Alhassan Salami Tijani, Sajith Thottathil Abdulrahman, Jeeventh Kubenthiran and Ibrahim Kolawole Muritala “Numerical Simulation of Thermophysical Properties and Heat Transfer Characteristics of Al2O3/CuO Nanofluid with Water/Ethylene Glycol as Coolant in a Flat Tube of Car Radiator” Pertanica Journal of Science and Technology, 2022, 30(2) 853-873 https://doi.org/10.47836/pjst.30.2.01 ) – (ESCI)
  9. Papa Mbaye Diouf, Coumba Thiandoume, Sajith T. Abdulrahman, Ousmane Ndour, K.P. Jibin, Hanna J Maria, Sabu Thomas, Adams Tidjani “Mechanical and Rheological Properties of Recycled HDPE and Ronier Palm Leaf Fiber Based Biocomposites”  Journal of Applied Polymer Science, Wiley, 2022, e51713,  (https://doi.org/10.1002/app.51713 ) – (SCI)
  10. A. Sajith, K.M. Praveen, Sabu Thomas, Zakiah Ahmad, Nandakumar Kalarikkal, Chandan Dhanani, Hanna J. Maria, “Effect of HAF carbon black on curing, mechanical, thermal and neutron shielding properties of natural rubber – Low-density polyethylene composites”, Progress in Nuclear Energy, Elsevier, 2021, 103940, 0149-1970 (https://doi.org/10.1016/j.pnucene.2021.103940) – (SCI)
  11. Sajith Thottathil Abdulrahman, Zakiah Ahmad, Sabu Thomas, Hanna J.M, Azerai Ali Rahman, “Viscoelastic and Thermal properties of Natural Rubber-Low Density Polyethylene composites with Boric acid and Borax”, Journal of Applied Polymer Science, Wiley, 2020, e49372, 1-12 (org/10.1002/app.49372) – (SCI)
  12. Sajith Thottathil Abdulrahman, Zakiah Ahmad, Sabu Thomas, Azerai Ali Rahman, “Morphology, Mechanical and Neutron attenuating properties of carbon black filler EPDM/HDPE composites, Phys.: Conf. Ser, 2020, 1529, 042091, 1-8 (https://doi.org/10.1088/1742-6596/1529/4/042091 ) – (Scopus)
  13. Yu.Prosanov, S.T.Abdulrahman, S.Thomas, N.V.Bulina, K.B.Gerasimov, “Complex of polyvinyl alcohol with boric acid: structure and use” Materialstoday communications, 14, 2018, 77-81 (https://doi.org/10.1016/j.mtcomm.2017.12.012) – (SCI)
  14. Nor Hanim Khiyon, Azerai Ali Rahman, Mohd Fadzil Arshad, Mohd Khairul Kamarudin, Sajith Totthatil A Rahman “Dynamic mechanical properties of Polyurethane Shape Memory Polymer Composites (SMPC) with different volume fractions of chopped strand mat glass fiber” International Journal of Integrated Engineering, Vol. 10 No. 9 (2018) p. 58-62 – (Scopus)
  15. A. Sajith, Ajay Vasudeo Rane, Krishnan Kanny “Analysis of polymeric composite material-based components using ANSYS workbench” Assessment of Polymeric Materials for Biomedical Applications, CRC Press 2023, ISBN 9781003319139, 93-100
  16. Raghvendra Kumar Mishra, Sajith T Abdulrahman “Tribological Performance of Polymer Composite Materials” Advanced Polymeric Materials, River Publishers 2018, ISBN 9788793609686, 193-237
  17. Sajith Thottathil Abdulrahman, Azerai Ali Rahman, Zakiah Ahamad, Sabu Thomas, “A Review on Dynamic Mechanical Properties of Polymer Nanocomposites”, Polymers and Multicomponent Polymeric Systems: Thermal, Thermo-Mechanical and Dielectric Analysis, CRC Press 2019, ISBN 9781138598140, 193-202
  18. Sajith Thottathil Abdulrahman, Zakiah Ahmad, Sabu Thomas, Azerai Ali Rahman, “Introduction to Neutron Shielding Materials” Micro and Nano Structured Composite Materials for Neutron Shielding Applications, ISBN: 9780128194621, Elsevier, 2020

International Books

  1. Advanced Polymeric Materials for Sustainability and Innovations, CRC Press 2018, ISBN 9781771886338, Edited book, Sajith Thottathil, Sabu Thomas, Nandakumar Kalarikkal, Didier Rouxel
  2. Advanced Polymeric Materials, River Publishers 2018, ISBN: 9788793609686, Authored and Edited book, Didier Rouxel, Sabu Thomas, Nandakumar Kalarikkal, Sajith T.A
  3. Micro and Nano Structured Composite Materials for Neutron Shielding Applications, Elsevier, 2020, ISBN: 9780128194621, Authored and Edited book, Sajith Thottathil Abdulrahman, Zakiah Ahmad, Sabu Thomas

Papers presented in Conferences

  1. “Study of Mechanical performances of epoxy nanocomposites with Exfoliated-Reduced Graphene Oxide” International Conference on Advances in Polymer Technology, 2016, APT 16.
  2. “Tribological performances of low temperature expanded Graphene oxide/epoxy nanocomposites” International Conference on Advances in Tribology, 2014, ICAT 14.
  3. “Dynamic Mechanical Analysis of Natural Rubber-Low Density Polyethylene with Neutron Absorbing Borax and Boric Acid Compounds” International Conference on Direct Digital Manufacturing and Polymers, ICDDMAP 2019.
  4. “Morphology, Mechanical and Neutron attenuating properties of carbon black filled EPDM / HDPE composites” 1st International Conference on Computing, Information Science and Engineering ICISE 2020, Kelantan, Malaysia.
  5. “Vulcanization and Mechanical properties of Natural Rubber-Low Density Polyethylene Boric acid composites” International Conference on Advances in Manufacturing and Material Science 2022 (ICAMMS 2022).
  6. “Polymer Composites for Neutron Shielding Applications” in International Conference on Macromolecules, 2016,  ICM 16.
  7. “Effect of HAF carbon black on Curing and Mechanical properties of Natural rubber- LDPE composites, International Conference on Polymer Processing and Characterization, 2016, ICPPC 16.
  8. “Investigations on Curing and Mechanical Properties of Natural rubber-LDPE composites for neutron shielding applications” 2017, ICNM 17.
  9. “Cure Behavior and Mechanical Properties of EPDM/HDPE Blends”International Workshop On Advanced Polymeric Systems, APS 2019.
  10. “Influence of Nano B4C on the Mechanical Properties EPDM/HDPE Composites for Neutron Shielding Purpose” 4th-International Conference on Nanomaterials: Synthesis Characterisation and Applications, ICNM 2019.

Programs coordinated/ attended

  1. Organized FDP on “Academic Research: Methods & Strategies; Funding; Publishing in Indexed Journals”2021
  2. Organized FDP on “Application of Nanotechnology in Mechanical Engineering” sponsored by APJ Abdul Kalam Technological University”2023
  3. Organized International Conference on “International Conference on Technological Advancements in Civil and Mechanical Engineering” 2024
  4. Organized International Conference on “International Conference on Advanced Computing Communication and Electrical systems” 2024
  5. Organized International Conference on “International Conference on Intelligent Hardware-Software Robotics” 2024
  6. Organized FDP on “Crafting Research Success: A Journey from Problem Formulation to Academic Publication & Beyond”2025

⁠Professional body membership

SAEINDIA – Membership No: 7260410036

Courses offered

  • Metallurgy & Material Science
  • Dynamics and Design of Machinery
  • Sustainable Energy Process
  • Mechanics of Machinery
  • Refrigeration and Air Conditioning