
Branch:
Mechanical Engineering
Qualification:
Ph.D in Surface Modification of Biomaterials (Cochin University of Science & Technology), M Tech in Computer Aided Design and Computer Aided Manufacturing
Joined Date:
10 July 2025
Email:
Profile
Dr. Reghuraj A. R is an accomplished academician and researcher in Mechanical Engineering, holding a Ph.D. from Cochin University of Science and Technology (CUSAT). He has over 16 years of teaching experience and has published 10 journal papers and 8 conference papers in reputed national and international forums. He is the inventor of two granted patents in advanced surface engineering. Dr. Reghuraj has also successfully completed a funded M.Tech research project at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam, and serves as a peer reviewer for Elsevier and SAGE journals. His expertise spans materials engineering, surface coatings, and manufacturing technologies. He is presently working as an Assistant Professor in the Department of Mechanical Engineering at KMEA Engineering College.
Research Interest
- Biomaterials
- Surface modification techniques
- Conversion coating
- Parameter optimization using different tools.
- Additive Manufacturing
Honors & Awards
- Best Project Award – KCT 2009
Patents
- Title: A system and method for extracting coconut endosperm without breaking its shellPatent number: 2021105260Status: Granted from 17th January 2021
- Title: A system for developing a low-reflective magnetite coating on the surface of stainless-steel SS 420A.Patent number: 202024107428Status: Granted from 20th February 2025
Projects
- “Optimization of machining parameter in wire EDM with AISI 304 stainless steel using Taguchi method” in association with ISRO Trivandrum in 2021
- “Study of Behavioural Characteristics of SS316L” Under Implantation of Various Ions for artificial body implants, with Indira Gandhi Centre for Atomic Research (IGCAR) Kalpakkam (2008-2009).
- “Surface Modification and Characterization of Ultra High Molecular Weight Poly Ethylene (UHMWPE)”, (2007)
- “Performance Analysis of Dart Turbo-Prop Engine” at Hindustan Aeronautics Limited (HAL), Bengaluru (2006).
Reviewer
- Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Journal of Materials Science: Materials in Engineering, Springer Nature
Publications
- Characterization of Engine oil-based nano lubricant prepared using CuO and ZnO nano particles. AIP conf. Proc. 3134,130020 (2024). Doi: https://doi.org/10.1063/5.0227582
- Tribological evaluation of rice bran oil blended with calophyllum inophyllum oil as a potential base stock for bio-lubricant formulation. AIP conf. Proc. 3134, 090011 (2024). Doi: https://doi.org/10.1063/5.0227390
- Taguchi method and Box-Behnken design approach for process parameter optimization of magnetite (Fe3O4) coating developed on stainless steel 410 grade by hot alkaline treatment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;237(4):1583-1594. doi:1177/09544089221119244.
- Characterization and In Vitro Studies of Low Reflective Magnetite (Fe3O4) Thin Film on Stainless Steel 420A Developed by Chemical Method. Coatings,2021,11,1145. https://doi.org/10.3390/coatings11091145
- Investigation into Effect of Natural Shellac on the Bonding Strength of Magnesium Substituted Hydroxyapatite Coatings developed on Ti6Al4V Substrates. Coatings,2021,11,933. https://doi.org/10.3390/coatings11080933
- Development of biocompatible coating on Ti6Al4V implant materials using chitosan extracted from shellfish waste” ScienceDirect, Materials Today, Vol 47, Issue 15, 2021, (5209-5216). https://doi.org/10.1016/j.matpr.2021.05.533Get rights and content
- Relative improvements in antireflection property of black coating produced on stainless steel 310 using conversion coating techniques” ScienceDirect, Materials Today, Vol 47, Issue 15, 2021, (5079-5085). https://doi.org/10.1016/j.matpr.2021.05.247Get rights and content
- Black Oxide Conversion Coating on Metals: A Review of Coating Techniques and Adaptation for SAE 420A Surgical Grade Stainless Steel” ScienceDirect, Materials Today, Vol 4, Issue 9, 2017, (9534-9541). https://doi.org/10.1016/j.matpr.2017.06.219
- Investigation into Black Oxide Coating of 410 Grade Surgical Stainless Steel Using Alkaline Bath Treatment. International Journal of Medical, Health, Biomedical, Bioengineering and Pharmaceutical Engineering Vol:10, No:5, 2016 (267-271).
- Experimental Evaluation of Corrosion and Hardness on AISI 316l Stainless Steel Implanted with Nitrogen and Argon Ions. Volume 14, No.1, 2010 (80-87). 2478/v10147-011-0011-2
Conference Presentations
- “Optimization of machining parameters in wire EDM using Taguchi method”, International conference (MatTech 2024),
- “Static and dynamic wireless charging system for electric vehicle”, International conference on sustainable materials, manufacturing and renewable technologies (i-SMaRT) 2023 April 20-23 at FISAT.
- “Relative improvements in anti-reflection property of produced on 310 grade stainless steel using black oxide conversion coating techniques”, International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT) 2021 April 20-23 at FISAT.
- “Black Oxide Conversion Coating Techniques and Adaptation for SAE 420A Surgical Grade Stainless Steel”, International Conference on Recent Trends in Engineering and Materials Science, March 17-19 2016 at Jaipur National University.
- “Corrosion Resistance Enhancement by Various Ion Implantations on Bio-Material – SS316L”, National Conference on Recent Trends in Mechanical Engineering, April 2009.
- “Corrosion Resistance and Hardness Enhancement by Argon Ion Implantation on AISI 316L”, in National Conference on Advances in Mechanical Sciences on 26th – 27th March 2009.
- “Performance Analysis Of Dart Turbo Implantations on Bio-Material SS316L”, in CSIR sponsored National Conference on Soft Computing on 19th, 20th March 2009.
- “Enhancement of Performance of Dart Turbo-Prop Engine” In National Conference on Advances in Mechanical Sciences, on 26th, 27th March 2008.
Programs Coordinated /Attended
- Organised a technical talk on “Design Procedure of Centralized HVAC systems “on 13th February 2024.
- Organised a technical talk on “HVAC systems “on 26th March 2024.
- Organized a webinar on “Introduction to CNC programming” on 4th September 2020.
- Organized a talk on “career planning and training programme” by Dr. Civy Pulayath, training resource person on 25th July 2019.
- Organized an orientation session by Dr. C. K Subramanyaprasad, former Principal NSS Engineering College Palakkad on 22nd July 2019.
- Organized International Conference on Emerging Trends in Mechanical Engineering (ICETIME) held on 26-28 March 2015.
- Organized two-week online Workshop on Fluid Mechanics at RCET by IIT Kharagpur, 20th May to 4th June 2014.
- Organized a technical talk on “Mechanics of Solids” by Dr. Ajith Ramesh from Amrita Viswavidyapeedam Coimbatore on 7th April 2014.
- Organized a technical talk on “Energy Security for the Nation Need for the Future” by K K Rajan Outstanding Director and Fast Breeder Reactor Technology Group IGCAR Kalppakam, on 27th September 2013 on behalf of mechanical dept association.
- Organized a technical talk by Dr. M R Sreedharan Nair Former Principal GEC Thrissur on 5th March 2013.
- Organized a technical talk on “Opportunities for Mechanical Engineers” by Dr C E Krishnanan Director SNGCE on 6th March 2013.
- Participated in an industrial visit to Saint-Gobain, Palakkad (25 Nov 2025) under the PALS initiative to strengthen industry–academia collaboration.
- Attended SPARC giant (Indo-German) one day workshop on Additive Manufactured Bio-implants: Approaches, Trends & Challenges at IIT Palakkad on 20/11/2025.
- Attended 12 week FDP in Rapid Manufacturing, offered by NPTEL-AICTE.
- Attended three-day AICTE Vibrant Advocacy for Advancement and Nurturing of Indian Languages (VAANI) on Artificial intelligence in control and automation (AICA) at Jyothi Engineering College from 19/11/2025 – 21/11/2025.
- Attended five-day AICTE Training and Learning (ATAL) Academy faculty development program on scope and challenges in Robotics; Bridging Academia and Industry at Christ College of Engineering from 02/12/2024 – 07/12/2024.
- Attended three-day faculty development programme on teaching pedagogy conducted by Universal Engineering College in association with Teaching Learning Centre (TLC) IIT, Madras, from 27/7/23 – 29/7/2023.
- Attended short term training program on computational fluid dynamics using openFoam conducted by centre for scientific research in CFD (CSR-CFD), from 31st January to 4th February, 2023 at Universal Engineering College.
- Participated 3 days International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT) 2021 April 20-23, 2021 at FISAT.
- Participated 3 days Workshop on Biomaterials at Toc H Institute of Science and Technology, 6th – 9th January 2020.
- Participated 3 days International Conference on Recent Trends in Engineering and Materials Science, March 17-19, 2016 at Jaipur National University
- Participated in a training “Train the Trainer” Organized by ICT academy of Kerala on 15/12/2014 to 17/ 12/2014 at Govt. Engineering College Thrissur.
- Attended Dual Day Workshop on ‘An Introduction to Latex’ on 2nd, 3rd May 2014, Organized by Royal College of Engineering & Technology and ISTE Chapter.
- Participated in one week Coordinator’s Workshop on Fluid Mechanics, IIT Kharagpur, 11th to 15th March 2014.
- Participated in a Two Week ISTE Workshop on Engineering Mechanics, Conducted by IIT Bombay, 26th Nov to 6th December 2013.
- Attended Faculty Development Program on 12, 13 of October 2013, Organized by Royal College of Engineering & Technology and ISTE chapter.
- Participated in a Two Week ISTE Workshop on Engineering Thermodynamics, Conducted by IIT Bombay, 11th to 21st December 2012.
- Attended Faculty Development Program on 13, 14 and 15th of August 2012, Organized by Royal College of Engineering & Technology and ISTE chapter.
- Participated in a Two Week ISTE Workshop on Research Methodologies, Conducted by IIT Bombay, 25th June to 4th July 2012.
- Attended 1 Day training programme on “Concept of Teacher and Classroom Management” (ISTE) at IES College 14th August 2009.
- Attended in the one-day national workshop on “Renewable Energy Technologies for Biodiversity Conservation and Pollution Abatement” in Salim Ali centre for ornithology and natural history, Coimbatore in 2009.
- Attended Ten days Training at National Aerospace Laboratories (NAL), Bangalore & KMML Chavara, Kollam.
Professional Body Memberships
- Life member of International Association of Engineers (IAENG) with membership: 63966
- SAE INDIA |Yearly membership of Society of Automotive Engineers with Membership No: 7260410048
NPTEL Courses
- Successfully completing 12-week online course (July – Oct 2024) in Metal Additive Manufacturing and secured NPTEL certification from IIT Kanpur.
- Successfully completing 12-week online course (July – Oct 2024) in Additive Manufacturing and secured NPTEL certification from IIT Kanpur.
Courses Offered
- Thermal Engineering
- Thermodynamics
- Mechanics of Solids
- Metallurgy & Material Science
- Finite Element Analysis
- Cryogenic Engineering
- Computer Integrated Manufacturing
- Manufacturing Technology
- Metal Cutting & Forming
- Basics of Mechanical Engineering
- Introduction to Mechanical Engineering